Tuesday, March 8, 2016

Z32 AFM

Comes with base of stock airbox or can separate - price the same both ways.  Has the Silvia wiring plug attached.  Will cost you over $300 here
  http://justjap.com/bosch-z32-air-flow-meter-and-plug-bundle-tomei.html

The protective mesh is slightly damaged but the working bits inside are all intact PRICE $200 CALL OR SMS ADAM 0403 600 551


Brembo front brake setup for Silvia S15 - with free 5 stud conversion

Hi all.

Selling these, the older version of the Alpha / Omega Evo9 brake kit.  Like this link but with the older Evo 9 320mm rotors not the Evo 10 350mm rotors.  Note that the kit as sold still uses the Evo9 calipers same as mine.  These units were taken off a Evo after maybe 2-3,000 K and replaced with AP Racing gear so I picked these up near new from the owner of Alpha Omega personally.  The rotors and pads are the OEM Evo originals and after about 30,000 Ks are still as good as ever.  Pretty much fade free on the track and the other benefit is that you don't have to change pads as often, or much at all.

http://alphaomegaracing.com/p/119/c/73/Z33/ALPHA-OMEGA/Evo-350mm-Brembo-Front-Brake-Adapter-Kit-Version-3.html

I couldn't be bothered seperating the uprights / stub axles from the rest.  The original calipers, 320mm disks, and "dogbone" adapters cost me $1200.  So I'm throwing in a front 5 stud conversion and anodised aluminium wheel nuts and THE LOT IS YOURS FOR $1000

CALL OR SMS ADAM ON  0403 600 551.




Bilstein suspension custom built for S15

Bilstein suspension built specifically for my last Silvia S15 with track and Targa work in mind using Eibach springs with 6 / 4 spring rates by the suspension engineer at Heasman's Steering in Sydenham.  If you don't know they are Australia's main Bilstein agent. These are internally the same as other kits sold to several Time Attack entrants costing over $5,000 and probably very similar to Heasman's own NSW Sprint Series car.  Which is here
http://www.the-lowdown.com/heasman-s14/

The only difference is that these are non adjustable.  I know enough to know that the experts can set the valving much better than any knob-twiddling that I could do.  The rates set by Heasman's work very well for track or Targa type work.

Suspension cost over $3100 alone plus the camber tops @ $300 as listed here 
http://justjap.com/bc-racing-3d-adjustable-front-camber-tops-nissan-s13-s14-s15.html
and the invoice is attached here as proof.  These have done less than 15,000 Ks and are in as new condition.  They have a few marks and scratches as most of those Ks were done on Targa type roads and rural Queensland.

ASKING $2500 FOR THE FULL SET.  CALL OR SMS ADAM ON   0403600551